- Strength memberSteel wire
- Sheath ColorBlack
- Fibre ModeG652.D/G657A/OM1/OM2/OM3
- Fiber Core2-24
Central Loose Tube Fiber Optic Cable GYXTW
The optical ﬁber unit is positioned in the center. Two parallel Fiber Reinforced(FRP) are placed at the two sides. A steel wire as the additional strength member is also applied. Then, the cable is completed with a black PE or color LSZH sheath.
1.Two parallel steel wires ensure tensile strength
2.PSP enhances the cable crush resistance, impact resistance and moisture-proof.
3.Accurate fiber excess length ensures good mechanical and temperature performance.
4.Specially designed compact structure is good at preventing loose tubes from shrinking.
5.High strength loose tube that is hydrolysis resistant and special tube filling compound ensure a citical protection of fiber.
6.Small diameter, light weight and it is easy to be installed.
7.Crush resistance and flexibility
1.High-performance optical network operating
2.High-speed optical routes in buildings
3. Suitable for duct or aerial application
|Fiber cable performance specifications|
|@100Mbps 2km @1Gig 220m||850/1300nm|
|@100Mbps 2km @1Gig 500m||850/1300nm|
|@100Gig Varies by VCSEL typical 300m 2850nm||850/1300nm|
Approx 100 Terahertz
|Up to 100km Varies by transceiver||1310/1550nm|
Minimum allowable Tensile Strength
minimum allowable Crush Load
Minimum Bending Radius
A1,A2,B3 Non Bend-Sensitivity
B1.2 :Cut-off wavelength shifted
B4: Main technical data for positive