SC Fiber Optic Patchcord
- Connector typeSC
- SleeveZirconia
- Fibre ModeSM OM1 OM2 OM3 OM4 OM5
- Connector ColorBlue, Green, Beige,Aqua,Violet,
- Cable ColorYellow,Orange,Aqua,Violet,Lime Green
Description
The SC connectors used for our patch cords are designed to SC standards and are
fully compatible with existing SC hardware. Two simplex connectors can be
configured into a duplex format by adding a duplex clip.In addition to basic
testing, some mechanical and environmental tests per IEC or Telcordia are also
performed periodically to guarantee the best quality. For standard patch cords,
sampling check is performed on ferrule geometry to ensure high percentage
ofpolished connectors meeting GR-326 requirements. For premium grade, ferrule
geometry is tested on all patch cords to meet these GR-326 requirements.Other
than standard single mode and multimode fibers, G655, OM2,OM3,OM4 and OM5
fibers are also available upon request. Flame retardant grade cable sheathing
options are offered. Riser rated cable will be provided as standard. LSZH and
Plenum can be provided upon request.
Features
1 Push-pull latching mechanism
2 Non-optical disconnect performanc
3 High quality zirconia ferrules
4 Materials meet RoHS requirements
5 Riser, Plenum, and LSZH cables Available
Applications
1 Telecommunication
2 Computer networks
3 CATV networks
4 Active device termination
5 Instrumentation
Parameter
Mode | Single mode | Multimode | |
Polish | UPC | APC | PC |
Insertion Loss | ≤0.3dB | ≤0.2dB | ≤0.3dB |
Return Loss | ≥50dB | ≥60dB | ≥30dB |
Interchangeability | ≤0.2dB | ||
Salt Spray | ≤0.1dB | ||
Repeatability | ≤0.1dB (1000 times) | ||
Vibration | ≤0.2dB (550Hz 1.5mm) | ||
Temperature | ≤0.2dB (-40+85 sustain 100 hours) | ||
Humidity | ≤0.2dB (+25+65 93 R.H.100 hours) | ||
Apex Offset | 0μm ~ 50μm | ||
Radius of Curvature | 7mm ~ 25mm | ||
Standards-Compliant | ROHS,IEC and GR-326 |
Fiber cable performance specifications | |||
Fiber type | Min.Bandwidth | Distance | attenuation |
62.5/125 | 850/1300nm 200/500 MHz/Km | @100Mbps 2km @1Gig 220m | 850/1300nm 3.0/1.0dB/km |
50/125 | 850/1300nm 500/500 MHz/Km | @100Mbps 2km @1Gig 500m | 850/1300nm 3.0/1.0dB/km |
50/125 10Gig Optimized | 850/1300nm 2000/500 MHz/Km | @100Gig Varies by VCSEL typical 300m 2850nm | 850/1300nm 3.0/1.0dB/km |
9/125 | 1310/1550nm Approx 100 Terahertz | Up to 100km Varies by transceiver | 1310/1550nm 0.36/0.22dB/km |
Fiber Optic Mode | Single mode: |
1,9/125-G652D | |
2,9/125-G655 | |
3,9/125-G657A,G657A2 | |
Multimode: | |
4,50/125-OM2 | |
5,62.5/125-OM1 | |
6,50/125-OM3 | |
7.50/125-OM4 | |
8.50/125-OM5 |
Fibre | Corning,YOFC,Fujikura,OFS,other |
Connector | LC/PC, LC/APC,SC/PC, SC/APC, FC/PC, FC/APC, ST/PC, MU/PC,DIN/PC, E2000/PC, E2000/APC, MTRJ/Female, MTRJ/Male, MPO/MTP, SMA/PC, D4/PC |
Cord type | Simplex ,Duplex |
Cablediameter | 0.9mm ,2.0mm,2.8mm 3.0mm |
Cable jacket | PVC,LSZH,OFNR,OFNP |
length(M) | 0.5m,1m,3M,5m,10m,20m,100m |
RECOMMEND
LC Fiber Optic Patchcord
$ 0.50 ~ $ 3.00
SC Fiber Optic Patchcord
$ 0.50 ~ $ 3.00
FC Fiber Optic Patchcord
$ 0.50 ~ $ 3.00
MTRJ Fiber Optic Patchcord
$ 0.50 ~ $ 3.00
ST Fiber Optic Patchcord
$ 0.50 ~ $ 3.00
OM5 Fiber Optic Patchcord
$ 0.50 ~ $ 3.00